HP LaserJet P1002

Modified on Fri, Jun 10, 2022 at 10:40 AM

This document is also for 1020, 1022, 1018, P1002, P1005, or P1505 printer.

Openthe print cartridge door, and remove the old print cartridge.
CAUTION:
To prevent damage to the printcartridge, minimize its exposure to direct light by covering it with a sheetof paper.
Figure : Removing the print cartridge
Remove the new print cartridge fromthe packaging.
CAUTION:
To prevent damage to the print cartridge, hold the printcartridge at each end.
Pull the tab until all the tape is removedfrom the cartridge. Put the tab in the print cartridge box to return for recycling.
Figure : Removing the sealing tape
Gently rock the toner cartridge fromfront to back to distribute the toner evenly inside the cartridge.
Figure : Shaking the print cartridge
Insert the print cartridge in the deviceand close the print cartridge door.
Figure : Inserting the print cartridge
CAUTION:
If toner gets on your clothing, wipe it off with a dry clothand wash the clothing in cold water. Hot water setstoner into the fabric.

NOTE:
Whentoner is low, faded or light areas appear on the printed page. You might beable to temporarily improve print quality by redistributing the toner. Toredistribute the toner, remove the cartridge from the device and gently rockit from front to back.

Reference/s: https://support.hp.com/ph-en/document/c01178002